CFMOTO ZForce 950 Sport 6″ Portal Gear Lift

Description

Revamp Your ZForce with GDP Portals
Turn your CFMOTO
ZForce 950 Sport into a powerhouse with SuperATV’s 6” GDP Portal Gear Lift.
These portals are the strongest, most trusted in the industry. With a built-in
gear reduction and a full 6” lift, they give your ZForce more torque,
clearance, and the ability to run massive tires. You can pick a 30% or 45%
gear reduction, and for maximum strength, upgrade from cast to billet aluminum
portal housings.

Built for Extreme Terrain
Whether you’re tackling mud pits, rock gardens, or steep trails, our CFMOTO
ZForce 950 Sport portals deliver the performance you need. The 30% gear
reduction boosts your torque without killing top speed—perfect a balanced
performance profile. If you’re serious about running oversized tires and
crushing mud or rocks, go with the 45% gear reduction for unstoppable pulling
power and acceleration.

Protect Your Drivetrain

Unlike gear reductions in the transmission, GDP Portals move the
reduction to the hub. That takes stress off your axles, prop shaft,
differential, and transmission—you can push your ZForce 950 Sport harder
without worrying about premature drivetrain wear. Less strain means more
durability and fewer costly repairs.

Strength That
Lasts
Every set of CFMOTO ZForce 950 Sport GDP Portals is built
to handle the toughest rides. Choose between cast or 6061 billet aluminum
portal housings paired with 5/16” advanced steel alloy backing plates. With
this level of strength and engineering, you’re getting the most reliable
portal gear lift on the market.

• Our housings are reinforced for gear
  retention and optimized for oil flow
• Advanced steel alloy backing
  plates are stronger than chromoly
• Enhance with Portal Blood—gear oil
  formulated for GDP Portals
• There are no gimmicks and no vents because
  vents do more harm than good—we know because we tested them

Advanced Gaskets, Seals, and Bearings
Our portals
use:

• Advanced gaskets and O-rings with excellent oil resistance and
  low deterioration rates
• A sealed input gear and double-lipped output
  seal
• 100% sealing coverage throughout so you can forget about oil
  leaks
• Double-angular contact output bearings to prevent premature
  wear
• Roller idler and drive bearings to maintain perfect gear
  meshing

A Dedicated Customer Service
Team
Don’t stress about figuring out what works best for you. We
have a team dedicated to getting you exactly what you need. Give us a call so
we can get you the right portals for your CFMOTO ZForce 950 Sport!

CFMOTO ZForce 950 Sport 6” Portal Gear Lift Includes:

• (4) Assembled portal hub complete with 9310 gears, seals, output shaft,
  advanced gaskets, and thrust bearings
• (4) Universal hubs and
  stainless steel slotted rotors with lugs
• (4) Specialized steel alloy
  backing plates
• (4) Steel caliper mounting plates
• (2) Front
  caliper adapters
• (2) Rear caliper adapters
• (4) A-arm mounts
• (8) Shims
• Extended brake lines
• All required
  hardware, including recessed castle nut socket

FEATURE

• Available with billet or cast aluminum housing
• Cool, quiet,
  precision-ground gears made from 9310 alloy billet steel
• Increases
  width by 3” per side (6” total)
• 1.5” diameter 4340 hardened steel
  drive shaft
• No leak bearings and seals
• Universal hub fits
  all major bolt patterns
• Comes complete with all hardware, backing
  plates, brake lines and instructions

Wheel
Requirements:

• 18” or larger wheel required
• 18″
  wheels cannot exceed 5” backspacing
• 20” and larger wheels cannot
  exceed 5” backspacing
• Wheels need to have a center hole of at least
  3.25″ (82.55mm) or require a 1” wheel spacer

Fitment

• CFMOTO ZForce 950 Sport : 2023+
• CFMOTO ZForce 950 Sport 4 :
  2023+