Why You’ll Love It
6” Portal Lift adds ground clearance directly at the hubs 30% or 45% Gear Reduction adds torque and relieves drivetrain stress Cast or Billet Housings let you choose the construction that fits your build 9310 Steel Gears pair with a hardened 4340 drive shaft for strength Limited Lifetime Warranty protects your purchase
Revamp Your ZForce with GDP Portals
Turn your CFMOTO ZForce 950 Sport into a powerhouse with SuperATV’s 6” GDP Portal Gear Lift. These portals are the strongest, most trusted in the industry. With a built-in gear reduction and a full 6” lift, they give your ZForce more torque, clearance, and the ability to run massive tires. You can pick a 30% or 45% gear reduction, and for maximum strength, upgrade from cast to billet aluminum portal housings.
Built for Extreme Terrain
Whether you’re tackling mud pits, rock gardens, or steep trails, our CFMOTO ZForce 950 Sport portals deliver the performance you need. The 30% gear reduction boosts your torque without killing top speed—perfect a balanced performance profile. If you’re serious about running oversized tires and crushing mud or rocks, go with the 45% gear reduction for unstoppable pulling power and acceleration.
Protect Your Drivetrain
Unlike gear reductions in the transmission, GDP Portals move the reduction to the hub. That takes stress off your axles, prop shaft, differential, and transmission—you can push your ZForce 950 Sport harder without worrying about premature drivetrain wear. Less strain means more durability and fewer costly repairs.
Strength That Lasts
Every set of CFMOTO ZForce 950 Sport GDP Portals is built to handle the toughest rides. Choose between cast or 6061 billet aluminum portal housings paired with 5/16” advanced steel alloy backing plates. With this level of strength and engineering, you’re getting the most reliable portal gear lift on the market.
Our housings are reinforced for gear retention and optimized for oil flow
Advanced steel alloy backing plates are stronger than chromoly
Enhance with Portal Blood—gear oil formulated for GDP Portals
There are no gimmicks and no vents because vents do more harm than good—we know because we tested them
Advanced Gaskets, Seals, and Bearings
Our portals use
- Advanced gaskets and O-rings with excellent oil resistance and low deterioration rates
- A sealed input gear and double-lipped output seal
- 100% sealing coverage throughout so you can forget about oil leaks
- Double-angular contact output bearings to prevent premature wear
- Roller idler and drive bearings to maintain perfect gear meshing
- A Dedicated Customer Service Team
Don’t stress about figuring out what works best for you. We have a team dedicated to getting you exactly what you need. Give us a call so we can get you the right portals for your CFMOTO ZForce 950 Sport!
CFMOTO ZForce 950 Sport 6” Portal Gear Lift Includes
- (4) Assembled portal hub complete with 9310 gears, seals, output shaft, advanced gaskets, and thrust bearings
- (4) Universal hubs and stainless steel slotted rotors with lugs
- (4) Specialized steel alloy backing plates
- (4) Steel caliper mounting plates
- (2) Front caliper adapters
- (2) Rear caliper adapters
- (4) A-arm mounts
- (8) Shims
- Extended brake lines
- All required hardware, including recessed castle nut socket
- CFMOTO ZForce 950 Sport Max Tire Size
- Max Tire Size
- Required Suspension
- 36"
- Stock suspension
If you need help figuring out which gear reduction is right for you, check out our portal gear reduction calculator.
Max tire sizes are measured at full compression and full turn. The given tires sizes are the largest we fit without rubbing. With minor trimming or a small amount of rub, larger tire sizes can be used.
Features
- Available with billet or cast aluminum housing
- Cool, quiet, precision-ground gears made from 9310 alloy billet steel
- Increases width by 3” per side (6” total)
- 1.5” diameter 4340 hardened steel drive shaft
- No leak bearings and seals
- Universal hubs can be set up to work with the following bolt patterns: 4/156, 4/137, 4/115, and 4/110
- Comes complete with all hardware, backing plates, brake lines and instructions
Fitment (per SuperATV)
CFMOTO ZForce 950 Sport : 2023+ CFMOTO ZForce 950 Sport 4 : 2023+
Wheel Requirements
- 18” or larger wheel required
- 18" wheels cannot exceed 5” backspacing
- 20” and larger wheels cannot exceed 5” backspacing
- Wheels need to have a center hole of at least 3.25" (82.55mm) or require a 1” wheel spacer
Installation instructions (PDF)
Ships free from SuperATV. Price is SuperATV's current price.
