Ride Better with Mule Pro 1000 Rear Offset A-Arms If
you’re tired of your stock suspension getting hung up on obstacles and slowing
you down, you need SuperATV’s Kawasaki Mule Pro 1000 High-Clearance 1” Rear
Offset A-Arms. They give you high-clearance bends to clear branches and rocks,
beefier construction, and a 1” offset to fit bigger tires. It’s an all-around
performance upgrade.
More Clearance Makes Every Ride
Better The 1” offset on these Mule 1000 rear offset A-arms
extends your wheelbase for more stability on every climb. It also gives you
room for bigger tires—up to 28” when paired with forward offset A-arms. Pair
that with high-clearance bends that keep you from getting hung up on low-lying
rocks and branches, and you’re getting an all-around suspension upgrade.
Strength You Can See Our A-arms use bigger 1.25”
tubing to make sure they’re built for battle. They’ll plow through rocks and
stumps, no problem. Plus, it makes your machine look really damn tough.
They’re finished with a UV-resistant powder coating to keep them rust-free
ride after ride.
We’re confident in the strength of your Mule 1000
rear offset A-arms, and we want you to be too. That’s why we back them with a
lifetime warranty.
Control Your Camber with Adjustable Pivot
Blocks Our adjustable pivot blocks change the game. They come
preadjusted to stock specs right out of the box. But if you add a lift kit or
a ton of weight, you can maintain perfect camber with our pivot blocks. If you
make upgrades to your machine without adjusting your camber, you can end up
with excessive tire wear and poor handling. Our arms make that a non-issue.
Setup W/ 1" Forward Offset
A-Arms | Max Tire Size |
1" Forward Offset A-Arms
only | 26" |
1" Rear Offset A-Arms and 1" Forward
Offset A-Arms | 30" |
Front and Rear Offset w/ OE
Bumper | 29" |
Front and Rear Offset w/ SATV Bumper
|
26" |
Front and Rear Offset w/ 2" Lift
| 33" |
Front and Rear
Offset w/ 2" Lift and OE bumper | 33" |
Front and
Rear Offset w/ 2" Lift and SATV Bumper | 30" |
FEATURE
- Adds 1” of rear offset
- Fit up to a 28” tire when paired with
forward offset A-arms - 1.25” tubing is 25% larger than stock
- Adjustable pivot blocks for full camber adjustability
- Includes
high-quality UHMW bushings at no extra cost - UV-resistant powder coat
finish - Easy to install
- Backed by a lifetime warranty
Fitment
- Kawasaki Mule Pro FX 1000 : 2024+
- Kawasaki Mule Pro FXR
1000 : 2024+ - Kawasaki Mule Pro FXT 1000 : 2024+
NOTE: 1” wheel spacer required if running stock wheels
