RackBoss 2.0 Is a New Kind of Rack Your steering rack
will eventually wear down, your steering will get sloppy, and your handling
will be unresponsive.. and there used to be nothing you could do about it.
RackBoss 2.0 changes all that because it’s the only rack on the market that
uses X24 Tech—our unique dual-bushing design that reduces wear by over 50%
compared to stock. So accept nothing less than SuperATV’s Polaris RZR S 900
RackBoss 2.0 Rack and Pinion to get durability you can’t find anywhere else no
matter how you ride.
Less Wear and Tear with Our Dual-
Bushing Design What makes RackBoss 2.0 so good at preventing
slop? It’s engineered with X24 Tech—heavy-duty PTFE bushings at both ends of
the rack that remove play from the internals. Reducing play also keeps the
tension spring nearly motionless. With little to no unintended internal
movement, this rack can turn massive tires through heavy rides and hard hits
and still stay in like-new condition for years longer than the next best rack.
And with the built-in grease fitting, you can push fresh grease through after
you go deep in mud or water.
Solid Steel Bar Tie
Rods For a beefy tie rod setup, you want to go with solid steel
bar tie rods. They’re made with 1” diameter steel bars that are paired with
bigger, better tie rods you’ll love—3/4” outer heim joint tie rods and
rebuildable inner tie rods that use 3/4” rod threads and 16 mm rack threads.
Altogether, they’re built for hard hits, big tires, and wild rides.
Swaged Tube Tie Rods Our swaged tube tie rods are tough
but lightweight. The flared out steel tube design boosts the strength beyond
what a standard 7/8” tube would have. Plus, it comes paired with our
unbeatable tie rod ends that use 16 mm rack threads and huge 14 mm rod
threads. They won’t let you down.
| | RackBoss 2.0
Swaged Tie Rod | RackBoss 2.0 Solid Steel Tie Rod |
| X24 Tech Dual-Bushing Design | ✔ | ✔ |
Inner Ball and Socket Thread
Diameter | 14 mm rod threads, 16 mm rack
threads | 3/4” rod threads, 16 mm rack threads |
Outer Tie Rod End Thread
Diameter | 14 mm | 3/4” |
Tie Rod
Material | Steel tube | Solid steel bar |
| Greasable | ✔ | ✔ |
Inner
Boots | ✔ | ✔ |
Steering Stop
Kit | ✔ | ✔ |
Misalignment Bushings,
Tie Rod Studs, & Hardware | ✔ | ✔ |
Patent No. 11,345,393
FEATURE
- Heavy-duty dual PTFE bushings:
- Designed with X24 Tech
- Prevents wear
- Reduces slop
- Improves overall
durability
- Solid steel tie rods use:
- 3/4” outer
tie rod ends - Rebuildable inner tie rod ends that use 3/4” rod threads
and 16 mm rack threads
- Swaged tube tie rods use:
- 14 mm outer tie rod ends
- Rebuildable inner tie rod ends that use
14 mm rod threads and 16 mm rack threads
- 65% larger
housing than stock - Over 50% less wear than OEM after 15,000
cycles - Grease fitting for rack gears
Fitment
- Polaris RZR S 900 : 2015+
- Polaris RZR 900 4 : 2015-2018
- Polaris RZR S4 900 : 2018
Replaces OEM Part #
: 1824349 and 1823994
